Updated
Wood filled PLA 3D printing service
Wood filled PLA is PLA loaded with real wood particles, which gives the finished part a matte grain-like surface that can be sanded and stained like timber. It exists for appearance, not for performance: mechanically it behaves like PLA, slightly weaker. It is used for architectural models, retail display, props and decorative work.
Get a price in Wood filled PLA Wood filled PLA is priced instantly. No account, no sales call.
What Wood filled PLA is good for
- Architectural and scale models
- Retail and display pieces
- Props and set dressing
- Parts that will be sanded and stained
What Wood filled PLA is the wrong choice for
- Any load-bearing role
- Outdoor use
- Fine mechanical detail
Designing for Wood filled PLA
- It sands and takes wood stain, which is the whole reason to choose it. Plan on finishing rather than expecting it off the machine.
- Mechanically treat it as PLA with a little less strength, and design accordingly.
Wood filled PLA against the other materials
| Material | Heat | Stiffness | Impact | Outdoors |
|---|---|---|---|---|
| PLA | Low | High | Low | Not suitable |
| PETG | Medium | Medium | Medium | Suitable |
| ABS | High | Medium | High | Not suitable |
| ASA | High | Medium | High | Suitable |
| TPU flexible | Medium | Flexible by design | High | Short term only |
| Nylon PA12 | High | Medium | High | Short term only |
| Polycarbonate | Very high | High | Very high | Short term only |
| PC-ABS | High | High | Very high | Not suitable |
| Carbon fibre filled | High | Very high | Low | Short term only |
| PETG CF | Medium | High | Low | Suitable |
| ABS CF | High | Very high | Medium | Not suitable |
| Wood filled PLA | Low | High | Low | Not suitable |
| Standard resin | Low | High | Low | Not suitable |
Printing Wood filled PLA at 3Descu
| Scale | One of the largest 3D printing factories in Eastern Europe, 200+ printers |
|---|---|
| Process | FDM, filament extrusion |
| Maximum part size | 320 x 320 x 320 mm on the standard fleet, up to 500 x 500 x 500 mm on the large-format machines. Flexible materials (TPU): up to 250 x 250 x 250 mm |
| Layer height | 0.12 mm to 0.28 mm, 0.20 mm by default |
| Minimum order | €20 |
| File formats accepted | STL, OBJ, 3MF, STEP, STP, up to 250 MB per file |
| Where it ships | Across the European Union, the United Kingdom, Switzerland and Norway, by courier from Romania |
| Uploaded files | Deleted 90 days after upload |
| Quality system | ISO 9001:2015 certified |
| Who prints it | TREIDESCUPRINT SRL, J18/753/2022, on its own machines |
Delivery
| Destination | Standard | Express |
|---|---|---|
| Romania | 1-2 business days | 1 business day |
| Bulgaria, Hungary | 2-3 business days | 1-2 business days |
| Poland, Czech Republic, Slovakia, Greece, Austria, Croatia, Slovenia | 3-4 business days | 2 business days |
| Germany, Italy, Netherlands, Belgium, Luxembourg, Latvia, Lithuania, Estonia | 4-5 business days | 2 business days |
Get an instant price Upload a file and the price appears in under a minute.
What this page does not claim
There is no tolerance figure and no strength figure for Wood filled PLA on this page. A printed part does not have the properties of the spool it came from, and this shop has not measured its own, so publishing a number lifted from a filament data sheet would be publishing somebody else's result as ours. What is missing and why is set out under design rules, and where a part needs one of those figures it is measured on a real printed sample rather than quoted from a table.
Get an instant price Upload a file and the price appears in under a minute.
Also known as wood filament, wood PLA. Material data sheets and a dimensional report can be supplied on request.
Material notes by email
Download the material guide (PDF). Ten pages on thirteen materials, free and with no email needed.
