PC-ABS 3D printing service
PC-ABS is a blend that keeps most of polycarbonate's toughness and heat resistance while printing more like ABS. It is the practical middle option for an engineering part that ABS is not quite strong enough for and polycarbonate is more machine time than it justifies. It is widely used for automotive interior components for exactly this reason.
Get an instant price PC-ABS is priced instantly. No account, no sales call.
What PC-ABS is good for
- Automotive interior parts
- Housings that take knocks
- Engineering parts near warm equipment
- Larger parts where PC would be too slow
What PC-ABS is the wrong choice for
- Outdoor use over months
- Cost-sensitive work
- Cosmetic surfaces straight off the machine
The long-form guide, with design rules and the alternatives side by side: PC-ABS 3D printing, explained.
Designing for PC-ABS
- If the choice is between ABS and PC and the part is large, PC-ABS is usually the one that ships.
- It shares ABS shrinkage behaviour, so the same rules about long flat sections apply.
PC-ABS against the other materials
| Material | Heat | Stiffness | Impact | Outdoors |
|---|---|---|---|---|
| PLA | Low | High | Low | Not suitable |
| PETG | Medium | Medium | Medium | Short term only |
| ABS | High | Medium | High | Not suitable |
| ASA | High | Medium | High | Suitable |
| TPU flexible | Medium | Flexible by design | High | Short term only |
| Nylon PA12 | High | Medium | High | Short term only |
| Polycarbonate | Very high | High | Very high | Short term only |
| PC-ABS | High | High | Very high | Not suitable |
| Carbon fibre filled | High | Very high | Low | Short term only |
| PETG CF | Medium | High | Low | Short term only |
| ABS CF | High | Very high | Medium | Not suitable |
| Wood filled PLA | Low | High | Low | Not suitable |
| Standard resin | Low | High | Low | Not suitable |
Printing PC-ABS at 3Descu
| Scale | One of the largest 3D printing factories in Eastern Europe, 200+ printers |
|---|---|
| Process | FDM, filament extrusion |
| Maximum part size | 320 x 320 x 320 mm on the standard fleet, up to 500 x 500 x 500 mm on the large-format machines |
| Layer height | 0.12 mm to 0.28 mm, 0.20 mm by default |
| Minimum order | €20 |
| File formats accepted | STL, OBJ, 3MF, STEP, STP, up to 50 MB per file |
| Where it ships | Across the European Union, the United Kingdom, Switzerland and Norway, by courier from Romania |
| Uploaded files | Deleted 90 days after upload |
| Quality system | ISO 9001:2015 certified |
| Who prints it | TREIDESCUPRINT SRL, J18/753/2022, on its own machines |
Delivery
| Destination | Standard | Express |
|---|---|---|
| Romania | 1-2 business days | 1 business day |
| Bulgaria, Hungary | 2-3 business days | 1-2 business days |
| Poland, Czech Republic, Slovakia, Greece, Austria, Croatia, Slovenia | 3-4 business days | 2 business days |
| Germany, Italy, Netherlands, Belgium, Luxembourg, Latvia, Lithuania, Estonia | 4-5 business days | 2 business days |
Get an instant price Upload a file and the price appears in under a minute.
What this page does not claim
There is no tolerance figure and no strength figure for PC-ABS on this page. A printed part does not have the properties of the spool it came from, and this shop has not measured its own, so publishing a number lifted from a filament data sheet would be publishing somebody else's result as ours. What is missing and why is set out under design rules, and where a part needs one of those figures it is measured on a real printed sample rather than quoted from a table.
Get an instant price Upload a file and the price appears in under a minute.
Also known as PC/ABS, polycarbonate ABS blend. Material data sheets and a dimensional report can be supplied on request.