Updated
How ordering a 3D printed part works
From a file to a part on your desk
There is no account to create, no form to wait on and no sales call before a price. The model is measured in your browser, priced immediately, and the whole route after that is visible to you rather than described to you.
Get an instant price The first step takes about a minute.
Your order, step by step
Seven steps from your files to your parcel. Each one says what happens, what you do and how long it usually takes, so nothing comes as a surprise.
-
Step 1 of 7
Request
- What happens now
- You upload your files, choose material and settings, and see an instant estimate.
- What you do next
- Send the request. It is free, needs no account and commits you to nothing.
- Typical timing
- About a minute.
More about this step
Your files are encrypted in transit and at rest in EU storage. A mutual NDA can be signed before you upload anything.
-
Step 2 of 7
Review and price
- What happens now
- An engineer checks every file for printability, free of charge, and confirms the price, the production time and the shipping cost.
- What you do next
- Nothing. If you want to add a detail, reply to the confirmation email.
- Typical timing
- We reply the same business day.
More about this step
The instant estimate is calculated from the model alone. The engineer settles orientation, supports and finishing, so the confirmed price can be lower or higher, and any change is explained in the offer.
-
Step 3 of 7
Accept
- What happens now
- Your offer arrives by email: the confirmed price, the production time and the date it is valid until.
- What you do next
- Open the offer, confirm the delivery address and accept. Nothing is ordered until you confirm.
- Typical timing
- Whenever you are ready, while the offer is valid.
More about this step
To change something first, reply to the offer email and we send a revised one. If the offer is not right for you, declining takes one click and costs nothing.
-
Step 4 of 7
Invoice and payment
- What happens now
- We issue your invoice and email it to you. One price for every payment method: bank transfer, card or invoice.
- What you do next
- Pay by bank transfer, the method we recommend, or by card through the secure link in the invoice email.
- Typical timing
- The invoice follows your acceptance. Production starts as soon as your payment arrives.
More about this step
Orders over €500 paid by bank transfer can be split 50/50: half to start production, half before dispatch. Card payments are made in full. Need a purchase order number on the invoice? Tell us before it is issued.
-
Step 5 of 7
Production
- What happens now
- Your parts are printed in our ISO 9001:2015 certified factory, where the printers run seven days a week.
- What you do next
- Nothing. You can ask for a progress photo from your order page at any time.
- Typical timing
- The production time stated in your offer.
More about this step
Production days are consecutive calendar days, because the printers run every day. Express production is faster; Economy costs less and takes longer.
-
Step 6 of 7
Quality check
- What happens now
- Every part is checked against the agreed specification before it is packed.
- What you do next
- Nothing. Photos and a dimensional report are available on request.
- Typical timing
- Before every dispatch, within the production time.
More about this step
If a part is out of the agreed specification, you get a reprint or refund. We are the manufacturer, so there is nobody in between.
-
Step 7 of 7
Dispatch
- What happens now
- Your parcel leaves the factory with the courier service you chose, and the tracking number reaches you by email and on your order page.
- What you do next
- Follow the parcel with the tracking link.
- Typical timing
- The delivery window for your country and service is in the dispatch email.
More about this step
Courier transit runs on business days. Express and standard services have different delivery windows, and both are shown before you order.
1. Upload the model
STL, OBJ, 3MF, STEP, STP up to 250 MB. Send a STEP file where you have one, because it stores true surfaces rather than a triangle approximation. The file is parsed in your browser, so a price costs no disclosure at all: nothing is uploaded to get one.
2. Choose material and settings
Material, colour, layer height, infill, wall thickness and quantity. Every one of them moves the price and the price moves as you change it, so the trade is visible instead of being explained afterwards. What each setting is actually worth changing is on the design rules page.
3. Read the price and the lead time
Both appear immediately, including the courier band for your country. Quantity matters here more than people expect, because setup and plate time are shared across a batch: enter the quantity you actually want rather than one. The minimum order is €20.
4. Order and pay
The quote is saved with its own number so it can be reopened, forwarded internally, or picked up again days later without re-entering anything. One price whichever way you pay: bank transfer (SEPA, in €), the method we recommend, or card or PayPal, by a secure Stripe link in the invoice email or on request. Orders over €500 paid by bank transfer can be split 50/50: half to start production, half before dispatch. Card and PayPal are paid in full upfront.
5. Watch it being made
Signing in to the order portal after ordering shows the order's current stage, the full configuration as it was quoted, and a thread for talking to the person handling it. Progress photos of the actual part are available on request rather than automatically, and a dimensional report can be supplied on request as well.
6. Dispatch
The tracking number appears in the portal and in an email when the parcel leaves. Printing runs seven days a week, so the production days quoted are consecutive days rather than business days, and only the courier leg follows a working week.
How we collect reviews
Only a buyer with a completed order can rate 3Descu, and each buyer rates on the platform they ordered through. We never filter ratings and never pay for them. The 4.7 / 5 shown on our pages is the average of all 200+ ratings, rounded to one decimal.
Delivery bands
| Destination | Standard | Express |
|---|---|---|
| Romania | 1-2 business days | 1 business day |
| Bulgaria, Hungary | 2-3 business days | 1-2 business days |
| Poland, Czech Republic, Slovakia, Greece, Austria, Croatia, Slovenia | 3-4 business days | 2 business days |
| Germany, Italy, Netherlands, Belgium, Luxembourg, Latvia, Lithuania, Estonia | 4-5 business days | 2 business days |
Shipping to the United Kingdom: VAT, duty and the GBP 135 rule are explained in the UK shipping guide.
Where the parts are made
| Scale | One of the largest 3D printing factories in Eastern Europe, 200+ printers |
|---|---|
| Process | FDM, filament extrusion |
| Maximum part size | 320 x 320 x 320 mm on the standard fleet, up to 500 x 500 x 500 mm on the large-format machines. Flexible materials (TPU): up to 250 x 250 x 250 mm |
| Layer height | 0.12 mm to 0.28 mm, 0.20 mm by default |
| Minimum order | €20 |
| File formats accepted | STL, OBJ, 3MF, STEP, STP, up to 250 MB per file |
| Where it ships | Across the European Union, the United Kingdom, Switzerland and Norway, by courier from Romania |
| Uploaded files | Deleted 90 days after upload |
| Quality system | ISO 9001:2015 certified |
| Who prints it | TREIDESCUPRINT SRL, J18/753/2022, on its own machines |
Get an instant price Upload a file and the price appears in under a minute.
Files are kept for 90 days from upload and a mutual NDA can be signed before anything is sent. Terms used above are in the glossary, and what this shop does not run is listed at what we do not print.
Choosing a supplier: 9 checks before you order a 3D printed part, and the ISO 9001:2015 certificate behind 3Descu.
Working with 3Descu: the partner programme for print services, moulders and hardware programmes, and 3D printing for student teams and research labs.
The whole factory on one page, with the deck to download in four languages: 3Descu capabilities.
Price a part from Claude, Cursor, ChatGPT or VS Code without leaving the chat: 3Descu in your AI assistant.
Material notes by email
Download the material guide (PDF). Ten pages on thirteen materials, free and with no email needed.
